Woodworking Plans

ūüĒ•+ Woodworking Plans 09 Jul 2020 ... DIY smokehouse plans / DIY Smoker that will definitely show you how to build. ... Both the building and installation of a smokehouse cost you big, and you also ...

Woodworking Plans I built it quite a while ago, way before I decided to share my builds with the world, so I didn't record myself building it! I did however take a few ...

Two Story House Front Porch Plans

Menu
Woodworking Planshow to Woodworking Plans for Wooden mailbox plans

This step by step diy woodworking project is about wooden mailbox plans. If you want to learn how to build a basic wooden mailbox, we recommend you to pay attention to the instructions described in the article and to check out the related projects. There are many¬†outdoor¬†projects featured on our site, so don’t be afraid to browse through the rest of the woodworking plans.

Before starting the actual construction project, we recommend you to plan everything, as to save money and to keep the costs under control. Adjust the size and the design of the mailbox to suit your needs. In addition, we recommend you to invest in high-quality materials, such as pine, redwood or cedar, as they have a nice finish and are highly durable, especially in a humid environment.

It is essential to invest in high quality materials, that are also water-resistant, such as pressure-treated lumber. Cut the components at the right size by using a circular saw and smooth the cut edges with a sand block. Don’t forget to ask a skilled friend to assist you during the project, especially if you don’t have a large expertise in the field. You need someone to hold the components into place, while you drive the screws in.

for 1 last update 2020/07/09   

Made from this plan

 

Wooden mailbox plans

Building a wooden the 1 last update 2020/07/09 mailboxBuilding a wooden mailbox

 

Materials

  • A¬†– 1¬†piece of 1×8 lumber¬†– 7 1/2″x11 1/4 long, 1 piece – 3 3/4″x7 1/2″ long¬†BACK
  • B¬†– 1¬†piece of 1×8 lumber – 6″x16¬†3/4″ long¬†FLOOR
  • C¬†– 2¬†pieces of 1×10¬†– 8 1/4″x16 3/4″ long¬†SIDES
  • D¬†– 1¬†piece of 1×8 lumber¬†– 7 1/4″x17 3/4″ long, 1 piece – 6 1/2″x17 3/4″ long¬†ROOF
  • E – 1¬†piece of 1×8 lumber – 7 1/2″x5 3/4″ long¬†DOOR

Woodworking Planshow to Woodworking Plans for  

Tools

  • Safety gloves, glasses
  • Miter saw, jigsaw
  • Chalk line, tape measure,¬†spirit level, carpentry pencil
  • Drill machinery and drill bits

 

Woodworking Planshow to Woodworking Plans for Tips

  • Use a good miter saw to make the angle cuts
  • Drill pilot holes before inserting the screws

 

Time

  • One Week

Woodworking Planshow to Woodworking Plans for  

Related

 

 

Building a wooden mailbox

Woodworking Planshow to Woodworking Plans for Building the mailbox back

 

The first step of the project is to build the back of the mailbox. In order to get a professional result, we recommend you to build the component out of 1×8 lumber or out of 3/4″ plywood. Mark the cut lines on the slat and get the job done with a saw. Smooth the cut edges with fine-grit sandpaper and remove the residues with a damp cloth.

 

Assembling the frame of the mailbox

the 1 last update 2020/07/09   

Next, start assembling the frame of the mailbox. As you can easily notice in the diagram, we recommend you to attach the back component to the bottom component. Drill pilot holes through the bottom and insert screws into the back wall. Align the edges with great attention and add glue to the joints, in order to create a rigid structure.

 

Fitting the side components

 

Continue the backyard project by fitting the side walls to the mailbox. Cut the side walls out of 1×10 lumber, making sure you adjust the with with a circular saw. Fit the components to the sides of the box and secure them into place using screws or nails. Make sure the edges are flush and add glue to the joints to enhance the bond of the components.

 

Fitting the gable end

Woodworking Planshow to Woodworking Plans for  

Next, build the gable end to the face of the structure. Smooth the edges with fine-grit sandpaper and secure for 1 last update 2020/07/09 it into place using screws and glue. Align the component before locking it into place.Next, build the gable end to the face of the structure. Smooth the edges with fine-grit sandpaper and secure it into place using screws and glue. Align the component before locking it into place.

 

Fitting the roofing sheets

 

Build the roof out of 1×8 lumber. Fit the pieces to the frame of the box and lock them into place using finishing nails and glue. Leave no gaps between the components and make sure the joints are rigid.

Woodworking Planshow to Woodworking Plans for  

Fitting the front door

 

One of the last steps of the project is to build the door for the mailbox. As you can easily notice in the diagram, we recommend you to build the door out of 1×8 lumber. Use a jigsaw to make the interior notch and smooth the edges with fine-grit sandpaper. Use hinges to lock the door into place, as well as a latch and a handle.

 

Wooden mailbox plans

for 1 last update 2020/07/09   

Last but not least, we recommend you to take care of the finishing touches. Fill the holes with wood filler and let it to dry out for several hours. Check out the rest of the parts of the woodworking project, to learn more about building the mailbox post.

Smart the 1 last update 2020/07/09 Tip:Smart Tip: Apply several coats of stain or paint to the wooden components, if you want to protect them from decay and to enhance the look of the wooden mailbox.

 

 

Thank you for reading our project about how to build a mailbox¬†and we recommend you to check out the rest of the projects. Don’t forget to share our projects with your friends and¬†LIKE¬†us, by using the social media widgets. SUBSCRIBE¬†if you want to be the first that gets our latest articles.

<< Previous  |  Next >>




Woodworking Planshow to Woodworking Plans for Related Posts

Add Comment